Dosy Pre Amp
-
Easy Rider
- Mud-Duck Sr.
- Posts: 7
- Joined: Feb 22 2008, 05:13
Dosy Pre Amp
I have a dosy rec-4 receiver pre amp. I would like to put in line with my base setup. I have a Ranger base station, dosy watt meter, Fat boy amp, not quite sure where and how to put it in-line. Any help would help. Don't won't to blow anything up! Need to make sure I have xmitter and ant. jumpers hooked up right to. Thanks Easy Rider
-
Slim Jim
- Wordwide & Qualified
- Posts: 1,080
- Joined: Jul 23 2007, 22:40
- Contact:
I think this order will work:
Base Radio = Pre-amp = Fatboy = watt-meter = antenna
start with your antenna coax and put it in the antenna jack on the watt meter, then go from the x-mitter connector on the watt meter to the antenna connector on the fatboy, then go from the x-mitter connector on the fatboy to the antenna connector on the pre-amp, then from the x-mitter connector on the preamp to the antenna connector on the radio...double check and re-check this...and then re-check it again.
Base Radio = Pre-amp = Fatboy = watt-meter = antenna
start with your antenna coax and put it in the antenna jack on the watt meter, then go from the x-mitter connector on the watt meter to the antenna connector on the fatboy, then go from the x-mitter connector on the fatboy to the antenna connector on the pre-amp, then from the x-mitter connector on the preamp to the antenna connector on the radio...double check and re-check this...and then re-check it again.
