Moderator: JR Moderator
- 6 PILL USER
- Posts: 75
- Joined: Friday, 20 February 2009, 1:13 AM
- Radio: Magnum S9 + 4 Pill
- Antenna: MM9 18" Shaft
- Location: Danville, IN
I changed the knobs to have the power/volume and squelch on a single double knob.
I added a talkback switch to the back.
I want to know how to add a varable power to the old squelch knob.
Also a swing kit to one of the switches.. maby the ch9 switch...
- Super Mud-Duck
- Posts: 9
- Joined: Saturday, 28 August 2010, 0:27 AM
- Radio: Uniden PC66
- Location: The Dirty Dub
- NEW DUCK
- Posts: 1
- Joined: Thursday, 17 July 2014, 8:20 AM
- Name: don
- Cell Phone: 8123609908
the right way to do it is inject a 1k tone into the mic and as it is swinging your rf power you peak each pot to get the most wattage out of the radio. if you do not have a tone generator you can say audio drug out and peak the pots that way to get you close. you also need a good watt meter to do this and a dummy load to get it right. some guys are even downloading a tone to their computers and turning it on and put the mic to the speaker to get the same results.
forgot to tell you use a cobra 25 service manual to see how to do the peak. same radio as the uniden. you can get a copy on cbtricks.com to look at what to do.
here is the service manual that shows how to tune the radio. do not mess with any other pots unless you have the proper equipment to do them right.
http://www.cbtricks.com/radios/cobra/25ltd/index.htm" onclick="window.open(this.href);return false;
Who is online
Users browsing this forum: No registered users and 4 guests