Super star 3300

This forum is intended for asking any other technical questions that you cannot find answers to in the other forums.
Post Reply
drew434
Duckplucker
Duckplucker
Posts: 127
Joined: February 27th, 2017, 5:48 pm
Handle: bandit
Real Name: Drew
Antenna: A 99
Radio: Galaxy 99 v
Contact:

Super star 3300

#384360

Post by drew434 »

I have a super star 3300 it has good receive and good transmit but no modulation I tried pa speaker and it has modulation on pa
User avatar
sonoma
Donor
Donor
Posts: 1,459
Joined: April 2nd, 2006, 3:10 pm
Handle: sonoma
Real Name: sonoma
Radio: President Washington
Contact:

Re: Super star 3300

#384361

Post by sonoma »

on the side of the case you will have a large transistor mounted to the side of the case. it is larger than the finals. it has 3 legs, check the voltages on all 3 legs in TX and RX modes to see what the voltages are. it may be bad. also let us know what the watts out put is showing when you key the mic.
drew434
Duckplucker
Duckplucker
Posts: 127
Joined: February 27th, 2017, 5:48 pm
Handle: bandit
Real Name: Drew
Antenna: A 99
Radio: Galaxy 99 v
Contact:

Re: Super star 3300

#384362

Post by drew434 »

Ok I will do that
drew434
Duckplucker
Duckplucker
Posts: 127
Joined: February 27th, 2017, 5:48 pm
Handle: bandit
Real Name: Drew
Antenna: A 99
Radio: Galaxy 99 v
Contact:

Re: Super star 3300

#384389

Post by drew434 »

That was the problem
drew434
Duckplucker
Duckplucker
Posts: 127
Joined: February 27th, 2017, 5:48 pm
Handle: bandit
Real Name: Drew
Antenna: A 99
Radio: Galaxy 99 v
Contact:

Re: Super star 3300

#384655

Post by drew434 »

I put a brand new regulator in the super star 3300 and it is getting hot

[ Post made via Android ] Image
User avatar
sonoma
Donor
Donor
Posts: 1,459
Joined: April 2nd, 2006, 3:10 pm
Handle: sonoma
Real Name: sonoma
Radio: President Washington
Contact:

Re: Super star 3300

#384670

Post by sonoma »

what part number did you put in it. the old 2sb754 chips will get hot if the radio is tuned to max. galaxy went to the 2sb827 a few years ago because of the 754 failures. a tip36c works good in that spot and is a higher amperage unit.there is a couple different suppliers for the tip36 chips and one is a big part and hard to get it into that location.

[ Post made via Linux Laptop ] Image
Post Reply