Image

Tight receive on my Uniden Washington

Have some other technical questions can't find the answer for? Come in and ask them here.

Moderator: JR Moderator

User avatar
Badge19
2 PILL USER
2 PILL USER
Posts: 10
Joined: Wednesday, 09 August 2017, 4:02 AM
Name: Dave

Tight receive on my Uniden Washington

Post by Badge19 » Monday, 09 October 2017, 6:54 AM

The receive on my Washington seems to be unusually tight. Having trouble pulling in distant stations. I hooked up a different radio on the same base antenna(A99) and got twice the receive signal; same operator in same location for both transmissions. Is there an adjustment/repair that can be done to improve the receive..?? :think:


User avatar
sonoma
Donor
Donor
Posts: 1274
Joined: Sunday, 02 April 2006, 14:10 PM
Location: Oklahoma

Re: Tight receive on my Uniden Washington

Post by sonoma » Monday, 09 October 2017, 10:07 AM

more than likely just needs the receive tuned. some one more than likely got inside with a screw driver and turned L cans that did not need to be turned trying to increase the TX

[ Post made via Linux Laptop ] Image

User avatar
MDYoungblood
Moderator
Moderator
Posts: 7082
Joined: Saturday, 12 June 2010, 19:05 PM
Logged in via: iPhone
Radio: Uniden Washington
Antenna: Avanti Sigma II
Name: Greg
Location: Baltimore, MD

Re: Tight receive on my Uniden Washington

Post by MDYoungblood » Tuesday, 10 October 2017, 7:36 AM

If no mods were done to the radio a quick blast of deoxit to the controls might wake up the receive especially the RF Gain control. If that doesn't help or like sonoma said, someone was inside the 2 main load cans to adjust (plastic tool only) are L3 and L4 (PC-385 board), adjust these to maximum sound on ch 19 AM. If after this it is still the same then it needs to go to a shop were they have the equipment to make a complete alignment.

3's

Greg
ImageImageImage


"321, the Middle of Maryland"

23 AM "WORLD Image WIDE" 38 LSB

Strong Supporter of America's Original Homeland Security Act
The Second Amendment


Base
Uniden Washington
Mobile
Texas Ranger TR-696FD1C
Handheld
Maxon HCB-40WX
Antennas
Avanti Sigma II
Homemade Full Wave Loop
Homemade 1/2 wave Dipole
Hustler 102" SS Whip and Hustler Ball Mount

Official Moderator - CBRT Complaint Department



User avatar
jon6667
Duckplucker
Duckplucker
Posts: 175
Joined: Wednesday, 11 May 2016, 7:17 AM
Name: jon
Cell Phone: 5183353857

Re: Tight receive on my Uniden Washington

Post by jon6667 » Wednesday, 11 October 2017, 10:22 AM

sounds like you need a full alignment. like the others told you

User avatar
narfedwards1
4 PILL USER
4 PILL USER
Posts: 25
Joined: Saturday, 15 October 2016, 13:12 PM

Re: Tight receive on my Uniden Washington

Post by narfedwards1 » Friday, 13 October 2017, 14:01 PM

If its the 858 chassis,change the tap on L4 to the high impedance unused leg and retune L4 and L5 .you will be amazed.Theres a youtube. Video by a swiss guy that goes over the mod.Highly recommended on 858 boards.

[ Post made via Mobile Device ] Image
Narf!




Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 2 guests