Image

**NON-SPONSOR** Pucks, Risers, and Corona balls

Place any good comments or company referrals here to sponsors or with individuals on the forum selling used equipment.

Moderator: JR Moderator

User avatar
drdx
Donor
Donor
Posts: 5966
Joined: Wednesday, 25 April 2007, 11:32 AM

**NON-SPONSOR** Pucks, Risers, and Corona balls

Post by drdx » Tuesday, 07 December 2010, 11:55 AM

Hey folks, I just received my order of items from **NON-SPONSOR**. I got a puck mount, a couple of risers, and a corona ball. I'm planning on doing a monster van this spring so I'm gathering the items so I'm ready to throw it all in once I find a van. I know you've probably seen the pics but after having this stuff in my hands I must say it is really nice. The risers are perfect for a 102 inch whip or for a universal threaded shaft extender that will work on anything with standard threads. The puck fits into its backing plate perfectly and all of it is finely machined. There is ZERO chance for error as it fits like a glove and takes the work out of making your own backing plate. I don't think his site's pics do it justice so I thought I'd say it here. Check them out and if you're in the market for a puck I don't think you'll find a better one. This isn't my first puck- I have 2 more- with a few years of using them- and the footprint, design, and quality of this one are all a cut above.

That said, in case you're wondering, I've never even talked to **NON-SPONSOR** on the phone, I did pay for the items, so no "silver spoon" snow job review here. I'm just a satisfied customer and like to pass on info when I find a good item.

-drdx


Yes it's me, Dollar-98, drdx, the original all *Censored*, shot cawla on workin this no-fade technology.

-drdx


User avatar
626
Donor
Donor
Posts: 1163
Joined: Thursday, 03 April 2008, 23:28 PM

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by 626 » Wednesday, 08 December 2010, 19:31 PM

Drdx,

Wow man thanks for the post.

I cant wait to see that puck installed on your ride. Please post up pics as soon as you can. Its always nice to get a referral from someone as well respected in our hobby as you are. Please let me know if I can be of any assistance and also know that I stand behind my products one hundred percent.

Thanks again and enjoy your new mount.



User avatar
543FtWorth
Wordwide & Qualified
Wordwide & Qualified
Posts: 1617
Joined: Sunday, 18 July 2010, 17:54 PM
Radio: (non-sponsor) 29 LTD
Antenna: *Censored*

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by 543FtWorth » Wednesday, 08 December 2010, 21:03 PM

Those are some nice looking pucks. If I cut a hole in my roof I know what to plug it with. Monster van? You going to use your 16 pill for a driver? :lol:



User avatar
drdx
Donor
Donor
Posts: 5966
Joined: Wednesday, 25 April 2007, 11:32 AM

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by drdx » Thursday, 09 December 2010, 7:04 AM

Well, I'm a few months out from the van deal if that comes together but I'll post pics when I do use this thing. I'll be using the risers in a few days.

I'm starting an ice cream truck business on the side for this next summer and the van will also be a fun radio machine.

Hey 543, I figured when I'm ready to do the van you'll be ready to upgrade so you can just drive over and trade me your 8 and some cash and you can take ownership of Tarrant county with this amp deck. Then, I'll try to do something really significant. Wattage isn't everything though, the van's roof will hopefully be a fun antenna test bed, especially if I get one of those really long cargo vans.

-drdx


Yes it's me, Dollar-98, drdx, the original all *Censored*, shot cawla on workin this no-fade technology.

-drdx

User avatar
Lost Ram
Donor
Donor
Posts: 925
Joined: Tuesday, 22 September 2009, 7:46 AM
Radio: Yaesu FT-991
Antenna: 700' Loop
Name: Kerry
Location: In the Bayou
Referrals: 1
Contact:

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by Lost Ram » Thursday, 09 December 2010, 9:28 AM

I just thought I would say that I have used **NON-SPONSOR**'s products as well. I have bought a few risers for the 102's, these are top notch quality!!!! More over they WORK. Forget the spring with the braid thing through the center. I can cover about 80+ channels over or under the 11(cb) meter band with out going over 1.5 SWR using **NON-SPONSOR**'s Riser!! Without going over a 2.0 SWR I can easily get from 25 MHZ to well into the 29 MHZ. I sent him a few pics of this install on a late model Ram, maybe in the future he might post them on his site for all to see his great product. Also do not worry about the shipping time, he is very prompt with getting your purchase out.
Thanks **NON-SPONSOR**!
Lost Ram
Kerry


CB: TRC-450, Imax@50'
Ham : Yaesu FT-857D, FT-897D, FT-990 and FT-991, FT-8900
Ham Antennas: 700' and 258' wire loop, Maco shooting Star tuned for 10 Meter, 250' doublet, 8E 2M Quad-SSB, 4E 2M Quad-FM, 2M Copper Slim Jim 2M omni.
"The two enemies of the people are criminals and government. So let us tie the second down with the chains of the Constitution so that the second will not become the legal version of the first."
Thomas Jefferson.


User avatar
626
Donor
Donor
Posts: 1163
Joined: Thursday, 03 April 2008, 23:28 PM

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by 626 » Thursday, 09 December 2010, 10:44 AM

Lost Ram wrote:I just thought I would say that I have used **NON-SPONSOR**'s products as well. I have bought a few risers for the 102's, these are top notch quality!!!! More over they WORK. Forget the spring with the braid thing through the center. I can cover about 80+ channels over or under the 11(cb) meter band with out going over 1.5 SWR using **NON-SPONSOR**'s Riser!! Without going over a 2.0 SWR I can easily get from 25 MHZ to well into the 29 MHZ. I sent him a few pics of this install on a late model Ram, maybe in the future he might post them on his site for all to see his great product. Also do not worry about the shipping time, he is very prompt with getting your purchase out.
Thanks **NON-SPONSOR**!
Lost Ram
Kerry
Thanks Lost Ram.

Dont worry I will post up some pics. I havent done any changes to the site in several weeks.



User avatar
Big Hoss
Donor
Donor
Posts: 15
Joined: Tuesday, 21 September 2010, 22:19 PM
Radio: Uniden Grant XL
Antenna: 102" Whip
Name: Dan
Location: The Bay State

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by Big Hoss » Friday, 13 May 2011, 23:37 PM

A van?!?! Oh that's going to be awesome! :r&r:


Handle: Big Hoss
DX #: 2032

User avatar
Rockin Ray
4 PILL USER
4 PILL USER
Posts: 45
Joined: Thursday, 05 May 2011, 12:34 PM
Radio: cobra29, galaxy33hml
Antenna: open coil
Name: Ray
Location: Bradenton, Florida

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by Rockin Ray » Tuesday, 15 October 2013, 15:55 PM

I got one of those non sponsor risers and they are really nice.



User avatar
Bombero
Site Admin
Site Admin
Posts: 5738
Joined: Saturday, 07 March 2009, 22:35 PM
Radio: RCI 2950 Mirage
Antenna: 2ft Wire hanger
Cell Phone: 1-800-MUD-DUCK
Location: In your radio
Referrals: 1

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by Bombero » Tuesday, 15 October 2013, 16:00 PM

HA...

This thread is 3 years old.


Official Moderator - CBRT Complaints Department
We encourage all users to support our sponsors. We believe our sponsors are the best out there.
Be sure to tell them you saw their name on CBRadioTalk.
Support our fine sponsors!


383 Boogieman

http://www.hamqsl.com/solar101pic.php

User avatar
Slyguy
Moderator
Moderator
Posts: 3692
Joined: Sunday, 03 October 2010, 20:23 PM
Radio: Kenwood, Yaesu, Icom
Antenna: Yes
Name: Sly
Location: Sherman TX
Referrals: 1

Re: **NON-SPONSOR** Pucks, Risers, and Corona balls

Post by Slyguy » Tuesday, 15 October 2013, 18:05 PM

Yes. I like my Non Sponsor Mount for the Jeep.


Slyguy
Zero Six Three
Sherman Texas

Official Moderator - CBRT Complaints Department
We encourage all users to support our sponsors. We believe our sponsors are the best out there.
Be sure to tell them you saw their name on CBRadioTalk.
Support our fine sponsors!


Post Reply Previous topicNext topic