Image

Browning Mark III

A place to ask questions about base setups.

Moderator: JR Moderator

User avatar
EZ CHOPPER
Skipshooter
Skipshooter
Posts: 283
Joined: Sunday, 27 November 2016, 8:53 AM
Name: Edward
Cell Phone: 615-967-1568

Browning Mark III

Post by EZ CHOPPER » Tuesday, 14 November 2017, 19:11 PM

Can you stack Browning radios or do they have to be side by side. I was wondering cause I know they get warm.


User avatar
MDYoungblood
Moderator
Moderator
Posts: 7222
Joined: Saturday, 12 June 2010, 19:05 PM
Radio: Uniden Washington
Antenna: Avanti Sigma II
Name: Greg
Location: Baltimore, MD

Re: Browning Mark III

Post by MDYoungblood » Wednesday, 15 November 2017, 9:40 AM

I have seen plenty of them stacked and both ways, receiver on top and transmitter on top, as long as the back of the radios are clear there shouldn't be an overheating problem, if in doubt you could get a couple small 12v fans and run them off a PS. I have also seen 1" rubber feet to change out on the radios so they sit apart a little farther.

3's

Greg
ImageImageImage


"321, the Middle of Maryland"

23 AM "WORLD Image WIDE" 38 LSB

Strong Supporter of America's Original Homeland Security Act
The Second Amendment


Base
Uniden Washington
Mobile
Texas Ranger TR-696FD1C
Handheld
Maxon HCB-40WX
Antennas
Avanti Sigma II
Homemade Full Wave Loop
Homemade 1/2 wave Dipole
Hustler 102" SS Whip and Hustler Ball Mount

Official Moderator - CBRT Complaint Department



User avatar
EZ CHOPPER
Skipshooter
Skipshooter
Posts: 283
Joined: Sunday, 27 November 2016, 8:53 AM
Name: Edward
Cell Phone: 615-967-1568

Re: Browning Mark III

Post by EZ CHOPPER » Wednesday, 15 November 2017, 21:46 PM

gotcha

User avatar
narfedwards1
4 PILL USER
4 PILL USER
Posts: 35
Joined: Saturday, 15 October 2016, 13:12 PM

Re: Browning Mark III

Post by narfedwards1 » Friday, 17 November 2017, 18:06 PM

Gotta side by side for now
You do not have the required permissions to view the files attached to this post.
Narf!



User avatar
EZ CHOPPER
Skipshooter
Skipshooter
Posts: 283
Joined: Sunday, 27 November 2016, 8:53 AM
Name: Edward
Cell Phone: 615-967-1568

Re: Browning Mark III

Post by EZ CHOPPER » Saturday, 18 November 2017, 7:37 AM

nice set


User avatar
narfedwards1
4 PILL USER
4 PILL USER
Posts: 35
Joined: Saturday, 15 October 2016, 13:12 PM

Re: Browning Mark III

Post by narfedwards1 » Saturday, 18 November 2017, 10:31 AM

Tx Chop...near mint..had to do electrolytics but all tubes are original Browning badged....its near mint and I got the Siltronix VFO working with a buffer amp so we are hangin out LSB 38.5 and lovin it.Thx for the compliment and this ol 421 on the North Shore will be listenin for ya and standing byy.....copy that

[ Post made via Mobile Device ] Image
Narf!



User avatar
jon6667
Skipshooter
Skipshooter
Posts: 205
Joined: Wednesday, 11 May 2016, 7:17 AM
Name: jon
Cell Phone: 5183353857

Re: Browning Mark III

Post by jon6667 » Monday, 20 November 2017, 11:08 AM

wish i still had mine. got stupid and sold it. i had the markIII external vfo golden eagle mic.

User avatar
EZ CHOPPER
Skipshooter
Skipshooter
Posts: 283
Joined: Sunday, 27 November 2016, 8:53 AM
Name: Edward
Cell Phone: 615-967-1568

Re: Browning Mark III

Post by EZ CHOPPER » Monday, 20 November 2017, 14:44 PM

I sold a good set i had along time ago but I have a couple sets now

User avatar
narfedwards1
4 PILL USER
4 PILL USER
Posts: 35
Joined: Saturday, 15 October 2016, 13:12 PM

Re: Browning Mark III

Post by narfedwards1 » Tuesday, 21 November 2017, 5:29 AM

What kinda SSB power out were you guys gettin assuming unmodded.Mine is untouched and I'm seein 3-5W voice with 10W on a whistle...any secret to get a little more SSB drive without overdriving audio?

[ Post made via Mobile Device ] Image
Narf!




Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 2 guests