102 Whip

[Big Lou]

Thinking of putting a 102' whip on my 2011 Ram. If you run one I would love to see some photos

[MDYoungblood]

I run a 102" whip on my pickup, you can look at some of my old posts I'm sure you'll find pics of my install and mount.

3's

Greg

[HOUND DOG]

I did away with the 102" and spring and bought the 108" whip instead. A lot less flopping around and better swr than the 102. Its mounted on a Tri-Mag with 5" magnets dead center of my Ford F150 extra cab. I also ran a 1-1/4 " copper braid strap from the mount to the trucks frame though it probably wasnt needed. I run this 108 with a 2x8 FB amp and 9914 davis coax cable. SWR is 1.3 (sitting still)even with the amp on:-) A fine tuned BEAST!....

[Grinder74]

I ran one on a Saturn with homemade trunk mount. Worked great but looked like an RC car!

[ Post made via Android ]

[443 Arizona]

out of aluminum,i made a 4" puck with a 4" backing plate for my SS whip and spring,ball, i think i am at about 109" but still flat swr . i should have made a blueprint cuase not i cant remember .

[AmEagle124]

I have a 102 SS whip on my Toyota Tacoma. Had to purchase some brackets for mounting. Bought two of them because I will co-phase them eventually. Had to move the mounting back a couple of inches from the cab, though. Too much SWR. No spring. The only noise I have is from the AC blower motor on high!!!