Moderator: JR Moderator
ATV side by side I do have a older radio General Grant that works really well in my Truck I would like to put this radio in my RZR but it is all Plastic what type of a antenna should I use
Thanks for any help
- Posts: 7222
- Joined: Saturday, 12 June 2010, 19:05 PM
- Radio: Uniden Washington
- Antenna: Avanti Sigma II
- Name: Greg
- Location: Baltimore, MD
Welcome to the forum. They are a neat ride those Polaris RZR's. In my opinion mount the radio and get an antenna mount that is a 3/8-24 thread then you can experiment with antennas. Put the mount as high as possible. My choice would be a 102" whip but anything 4ft or longer would work. The metal frame and roll-bar should be adequate for a counterpoise ground plane.
As a new member could you post an intro in the "Welcome to the Forum" topic, viewforum.php?f=89 , so others can say "Hi", thanks.
"321, the Middle of Maryland"
23 AM "WORLD WIDE" 38 LSB
Strong Supporter of America's Original Homeland Security Act
The Second Amendment
Texas Ranger TR-696FD1C
Avanti Sigma II
Homemade Full Wave Loop
Homemade 1/2 wave Dipole
Hustler 102" SS Whip and Hustler Ball Mount
- The DB
- Posts: 459
- Joined: Friday, 12 August 2011, 21:17 PM
- Radio: Galaxy DX 55HP
- Antenna: ¼λ Mobile Antenna.
- Name: Steve
- Location: Gateway City in the Show Me State
With a setup like those vehicles, if you have any issues of being bitten by RF when transmitting, or any other interference/problems, or even problems with the vehicle when transmitting on the radio, you should look at adding an RF choke to the feed line near the feedpoint of the antenna. The lack of a flat sheet of metal immediately under the antenna may make such a choke beneficial.
Who is online
Users browsing this forum: No registered users and 1 guest